banner_page

MAX6719AUTSYD3+T

1V6 Terminals 6-Pin Voltage supervisor3 Channels Min 800mV Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6719AUTSYD3+T
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 759
  • Description: 1V6 Terminals 6-Pin Voltage supervisor3 Channels Min 800mV Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Packaging Strip
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Matte Tin (Sn)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Additional Feature RESET THRESHOLD VOLTAGE IS 2.925
Subcategory Power Management Circuits
Max Power Dissipation 696mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1V
Terminal Pitch 0.95mm
Pin Count 6
Power Supplies 1/5V
Temperature Grade AUTOMOTIVE
Number of Channels 3
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Operating Supply Current 15μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Number of Voltages Monitored 3
Reset Timeout 140 ms
Threshold Voltage 2.925V
Undervoltage Threshold 2.125V
Overvoltage Threshold 2.25V
Height Seated (Max) 1.45mm
Length 2.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX6719AUTSYD3+T Overview


This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Packaging is in the form of a Strip. The purpose of this IC management is to provide you with a reference of 1 functions. There are 3 channels available on this supervisor, and each channel has a different function. In this IC management you will find SOT-23-6 functions for you to refer to. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 1V volt supply. When a supply voltage of 3 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 6 pins. 6 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. There is a supply current of 15μA for the power management. There are other features such as RESET THRESHOLD VOLTAGE IS 2.925 to name a few. It requires 1/5V watts of power to operate this voltage supervisor.

MAX6719AUTSYD3+T Features


Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6719AUTSYD3+T Applications


There are a lot of Maxim Integrated MAX6719AUTSYD3+T Voltage Supervisors applications.

  • Display equipment
  • Electronics installed in the vehicle
  • Refrigeration
  • Power distribution systems of operating room
  • Leakage protection
  • Consumer electronics
  • Sensitive sensors
  • External alarm
  • Important electronics for automotive safety
  • Fire equipment power monitoring system

Write a review

Note: HTML is not translated!
    Bad           Good