MAX6719AUTTWD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6719 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Power Supplies | 1/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.665V 3.075V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 1.71V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6719AUTTWD3+T Overview
As you can see, this power management is mounted through 6 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are 3 channels on this power managment ic that can be found in a series. In this IC management you will find SOT-23-6 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. When 1V is applied to the power ic, it conducts. IC management conducts in a 3-voltage supply. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 6 pins on the board. There are 6 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6719, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 1/5V volts of power in order for this voltage supervisor to operate.
MAX6719AUTTWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6719AUTTWD3+T Applications
There are a lot of Maxim Integrated MAX6719AUTTWD3+T Voltage Supervisors applications.
- Battery cars
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
- Fire equipment power monitoring system
- Automotive power systems
- Power distribution systems of CCU
- Analog circuit
- Refrigeration
- Electric heating appliances
- Transformer load monitoring equipment
