MAX6719UTLTD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 6 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Power Supplies | 1/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140 ms |
| Threshold Voltage | 4.625V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6719UTLTD3+T Overview
A total of 6 terminals are used to mount this power management. Packaged in the form of a Strip, power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 3 channels that can be found. In this PMIC, you can find SOT-23 functions for your reference. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 3-voltage supply. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. 6 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. There is a 15μA supply current present in the power management. The voltage supervisor requires a power source of 1/5V volts in order to work correctly.
MAX6719UTLTD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6719UTLTD3+T Applications
There are a lot of Maxim Integrated MAX6719UTLTD3+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Personal computers
- Microprocessor system
- Radar
- Battery-powered equipment
- Medical-specific insulation monitor
- Important electronics for automotive safety
- Detection of phase imbalance
- DVR
- Dash board
