Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
696mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.95mm |
Base Part Number |
MAX6719 |
Output |
Open Drain or Open Collector |
Pin Count |
6 |
Power Supplies |
1/5V |
Number of Channels |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
800mV |
Operating Supply Current |
15μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.575V 2.925V Adj |
Number of Voltages Monitored |
3 |
Reset Timeout |
140ms Minimum |
Undervoltage Threshold |
1.53V |
Overvoltage Threshold |
1.62V |
Height Seated (Max) |
1.45mm |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX6719UTSVD3+T Overview
There are 6 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are 3 channels on this power managment ic that can be found in a series. In this IC management you will find SOT-23-6 functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3 is used to conduct the PMIC chip. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 15μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by MAX6719. To operate this power management, you will need at least 1/5V volts of power.
MAX6719UTSVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6719UTSVD3+T Applications
There are a lot of Maxim Integrated MAX6719UTSVD3+T Voltage Supervisors applications.
- DVR
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Consumer electronics
- Computer applications
- Electric heating appliances
- Rechargeable batteries
- Telecommunications equipment
- Household appliances
- Battery cars