banner_page

MAX6719UTTGD6+T

6 Terminals MAX6719 Voltage supervisor3 Channels Min 800mV Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6719UTTGD6+T
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 860
  • Description: 6 Terminals MAX6719 Voltage supervisor3 Channels Min 800mV Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2006
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type Multi-Voltage Supervisor
Max Power Dissipation 696mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Terminal Pitch 0.95mm
Base Part Number MAX6719
Output Open Drain or Open Collector
Number of Channels 3
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Operating Supply Current 15μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 1.11V 3.075V Adj
Number of Voltages Monitored 3
Reset Timeout 560ms Minimum
Undervoltage Threshold 1.08V
Overvoltage Threshold 1.14V
Height Seated (Max) 1.45mm
Length 2.9mm
RoHS Status ROHS3 Compliant

MAX6719UTTGD6+T Overview


As you can see, this power management is mounted through 6 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 3 channels. Please find attached SOT-23-6 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. When a supply voltage of 3 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There are 6 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. There is a 15μA supply current present in the power management. It is always advisable to use MAX6719, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6719UTTGD6+T Features


Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6719UTTGD6+T Applications


There are a lot of Maxim Integrated MAX6719UTTGD6+T Voltage Supervisors applications.

  • Kitchen appliances
  • External alarm
  • Electronics installed in the vehicle
  • Detection of phase imbalance
  • Stable power system
  • Utility meter
  • Analog circuit
  • WiFi router
  • Important electronics for automotive protection
  • Solar power charger

Write a review

Note: HTML is not translated!
    Bad           Good