banner_page

MAX6719UTTZD3+T

6 Terminals 6-Pin MAX6719 Voltage supervisor3 Channels Min 800mV Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6719UTTZD3+T
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 433
  • Description: 6 Terminals 6-Pin MAX6719 Voltage supervisor3 Channels Min 800mV Max 5.5V (Kg)

Details

Tags

Parameters
Package / Case SOT-23-6
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 696mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.95mm
Base Part Number MAX6719
Output Open Drain or Open Collector
Pin Count 6
Power Supplies 1/5V
Number of Channels 3
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Operating Supply Current 15μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.313V 3.075V Adj
Number of Voltages Monitored 3
Reset Timeout 140ms Minimum
Undervoltage Threshold 2.25V
Overvoltage Threshold 2.375V
Height Seated (Max) 1.45mm
Length 2.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount

MAX6719UTTZD3+T Overview


There are 6 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 3 channels on this power managment ic that can be found in a series. Please find attached SOT-23-6 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. When 3 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. A total of 6 pins are located on this power management. This power management has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6719, the base power ics number. There is a requirement for 1/5V power to power this power management.

MAX6719UTTZD3+T Features


Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6719UTTZD3+T Applications


There are a lot of Maxim Integrated MAX6719UTTZD3+T Voltage Supervisors applications.

  • Radio
  • Electrical fire monitoring system
  • FPGA design
  • Insulation fault location system
  • Detection of phase sequence
  • Linux and server computing
  • Magnetic resonance imaging
  • Household appliances
  • Low voltage/high power - AI, GPU
  • Detection of phase imbalance

Write a review

Note: HTML is not translated!
    Bad           Good