MAX6722UTSDD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 6 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Power Supplies | 1/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140 ms |
| Threshold Voltage | 2.925V |
| Undervoltage Threshold | 765mV |
| Overvoltage Threshold | 810mV |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6722UTSDD3+T Overview
There are 6 terminals on this power management that allow it to be mounted. Packaging is in the form of a Strip. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 2 channels that can be found. There are SOT-23 functions included in this PMIC so that you can refer to them. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 2. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 6 pins in it. This power management has 6 pins. It is recommended that Vsup should not be less than 800mV for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The supervisor's supply current is specified to 15μA. A power supply of 1/5V watts is required for the operation of this power management.
MAX6722UTSDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6722UTSDD3+T Applications
There are a lot of Maxim Integrated MAX6722UTSDD3+T Voltage Supervisors applications.
- Utility meter
- Medical-specific insulation monitor
- Battery cars
- Satellite navigation
- Set top box
- Transformer load monitoring equipment
- Digitally controlled LDO regulators circuit
- Refrigeration
- Electronics installed in the vehicle
- Power distribution systems of CCU
