Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
TIN |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
696mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX6723 |
Output |
Open Drain or Open Collector |
Pin Count |
6 |
Qualification Status |
Not Qualified |
Power Supplies |
1/5V |
Number of Channels |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
800mV |
Operating Supply Current |
15μA |
Adjustable Threshold |
YES |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
1.11V 1.665V Adj |
Number of Voltages Monitored |
3 |
Reset Timeout |
140ms Minimum |
Undervoltage Threshold |
1.08V |
Overvoltage Threshold |
1.14V |
Height Seated (Max) |
1.45mm |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX6723AUTWGD3+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. There are a total of 3 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. There are 6 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 800mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 15μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX6723, the base power ics number. This power management requires 1/5V power to work.
MAX6723AUTWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6723AUTWGD3+T Applications
There are a lot of Maxim Integrated MAX6723AUTWGD3+T Voltage Supervisors applications.
- Magnetic resonance imaging
- External alarm
- Set top box
- Smartphones
- Power distribution systems of operating room
- Consumer electronics
- Power distribution systems of CCU
- DC stabilized power supply module
- Important electronics for automotive safety
- Radar