MAX6725AKASHD3+T
| Parameters | |
|---|---|
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140 ms |
| Threshold Voltage | 2.925V |
| Undervoltage Threshold | 1.275V |
| Overvoltage Threshold | 1.35V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Packaging | Strip |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 1/5V |
MAX6725AKASHD3+T Overview
As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Strip. Please find attached 1 functions for your reference in this IC power. There are 3 channels on this power managment ic that can be found in a series. In this IC management you will find SOT-23-8 functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power ics operate at 3 supply voltages. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. The pins of the power management system count 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. There is a supply current of 15μA for the power management. The power management must be powered by 1/5V volts to function properly.
MAX6725AKASHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6725AKASHD3+T Applications
There are a lot of Maxim Integrated MAX6725AKASHD3+T Voltage Supervisors applications.
- Sensitive sensors
- Battery-powered equipment
- Microprocessor system
- Power communication system
- Military communications
- Medical-specific isolation transformer
- Satellite navigation
- Battery cars
- Analog circuit
- FPGA design
