MAX6725AKAWGD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | RESET THRESHOLD VOLTAGE ARE 1.665V AND 1.11V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX6725 |
| Output | Open Drain, Open Drain |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 1/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.11V 1.665V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.08V |
| Overvoltage Threshold | 1.14V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6725AKAWGD3+T Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 3 channels. There are SOT-23-8 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Open Drain, Open Drain from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 15μA. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to MAX6725, the base PMIC number. To operate this power management, you will need at least 1/5V volts of power.
MAX6725AKAWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6725AKAWGD3+T Applications
There are a lot of Maxim Integrated MAX6725AKAWGD3+T Voltage Supervisors applications.
- Smart meter
- Multi-voltage system
- Microcontroller system
- Low voltage/high power - AI, GPU
- Linux and server computing
- Leakage current detection
- Medical-specific isolation transformer
- Satellite navigation
- Transformer load monitoring equipment
- Analog circuit
