MAX6725KAZWD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 8 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Power Supplies | 1/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140 ms |
| Threshold Voltage | 2.313V |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 1.71V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6725KAZWD3+T Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Strip. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 3 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SOT-23 functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 3 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 8 pins are present in total in this power management. This power management has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. As far as the supply current of the power management is concerned, it is 15μA. This power management requires 1/5V power to work.
MAX6725KAZWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6725KAZWD3+T Applications
There are a lot of Maxim Integrated MAX6725KAZWD3+T Voltage Supervisors applications.
- emergency room
- Embedded computing
- Satellite navigation
- Leakage current detection
- Data storage applications
- Leakage protection
- Display equipment
- Set top box
- Detection of phase loss
- Unattended substation automation
