MAX6727AKAWGD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE ARE 1.665V AND 1.11V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX6727A |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 1/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.11V 1.665V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.08V |
| Overvoltage Threshold | 1.14V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6727AKAWGD3+T Overview
As you can see, this power management is mounted through 8 terminals. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. There are a total of 3 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SOT-23-8 functions for your reference. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. IC management is possible to find a succession of 3 voltages that have been checked. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 8 pins on IC management. 8 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Among other features, IC power can be also taken advantage of [0], for instance. You can always use MAX6727A, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 1/5V power to work.
MAX6727AKAWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6727AKAWGD3+T Applications
There are a lot of Maxim Integrated MAX6727AKAWGD3+T Voltage Supervisors applications.
- Set top box
- Satellite navigation
- Smartphones
- Battery-powered equipment
- emergency room
- Consumer electronics
- Computer applications
- Electric heating appliances
- Solar power charger
- Sensitive sensors
