MAX6728KATGD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6728 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G6 |
| Power Supplies | 1/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.11V 3.075V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.08V |
| Overvoltage Threshold | 1.14V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6728KATGD3+T Overview
Power management is mounted through 6 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. There are a total of 3 channels on this supervisor, and they are arranged in a series. Please find attached SOT-23-8 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. In total, it has 8 pins on IC management. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6728, which is the base power ics number. To operate this power management, you will need at least 1/5V volts of power.
MAX6728KATGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6728KATGD3+T Applications
There are a lot of Maxim Integrated MAX6728KATGD3+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- External alarm
- Power distribution systems of operating room
- Insulation fault location system
- Stable power system
- Medical-specific insulation monitor
- Microcontroller system
- Telecommunications equipment
- DC stabilized power supply module
- Electrical fire monitoring system
