MAX6729KAVDD3+T
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 1/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140 ms |
| Threshold Voltage | 1.575V |
| Undervoltage Threshold | 765mV |
| Overvoltage Threshold | 810mV |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MAX6729KAVDD3+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in a Strip-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. This power management is made up of 3 channels which are available in a series format. In this IC management you will find SOT-23-8 functions for you to refer to. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. Power ics operate at 3 supply voltages. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. As far as the supply current of the power management is concerned, it is 15μA. This power management requires 1/5V power to work.
MAX6729KAVDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6729KAVDD3+T Applications
There are a lot of Maxim Integrated MAX6729KAVDD3+T Voltage Supervisors applications.
- Battery cars
- DSP
- Military electronics
- FPGA design
- Important electronics for automotive safety
- Low voltage/high power - AI, GPU
- Power distribution systems of infant care room
- WiFi router
- Detection of phase sequence
- Fire equipment power monitoring system
