Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Gold (Au) - with Nickel (Ni) barrier |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
714mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX6735 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Power Supplies |
1/5V |
Number of Channels |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
800mV |
Operating Supply Current |
4μA |
Adjustable Threshold |
YES |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
1.313V 2.925V Adj |
Number of Voltages Monitored |
3 |
Reset Timeout |
140ms Minimum |
Undervoltage Threshold |
1.275V |
Overvoltage Threshold |
1.35V |
Height Seated (Max) |
1.45mm |
Length |
2.9mm |
Width |
1.625mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX6735KASHD3+T Overview
It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 3 channels. For your reference, this PMIC includes a list of SOT-23-8 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. A total of 8 pins are located on this power management. 8 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 4μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6735, the base power ics number. In order to operate this power management, it requires 1/5V volts of power.
MAX6735KASHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
4μA operating supply current
MAX6735KASHD3+T Applications
There are a lot of Maxim Integrated MAX6735KASHD3+T Voltage Supervisors applications.
- Precision measurement
- FPGA design
- Battery cars
- Smart meter
- Consumer electronics
- Display equipment
- Important electronics for automotive safety
- Smartphones
- WiFi router
- Solar power charger