MAX6736XKSVD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6736 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Power Supplies | 1.5/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.575V 2.925V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 150ms Minimum |
| Threshold Voltage | +2.925V |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.1mm |
| RoHS Status | ROHS3 Compliant |
MAX6736XKSVD3+T Overview
A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. There are 5-TSSOP, SC-70-5, SOT-353 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 1.8V is used to conduct the PMIC chip. Power management conducts at a voltage of 2. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. IC management can only work with a supply voltage of 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 10μA. A similar IC managements number of the manufacturer can always be found by using MAX6736, the base power ics number. The voltage supervisor requires a power source of 1.5/5V volts in order to work correctly.
MAX6736XKSVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6736XKSVD3+T Applications
There are a lot of Maxim Integrated MAX6736XKSVD3+T Voltage Supervisors applications.
- Detection of phase sequence
- Rechargeable batteries
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Radio
- emergency room
- Power distribution systems of ICU
- Analog circuit
- Embedded computing
- Efficient information transmission
