MAX6736XKWTD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6736 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Power Supplies | 1.5/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.665V 3.075V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 150ms Minimum |
| Threshold Voltage | +1.665V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 1.1mm |
| RoHS Status | ROHS3 Compliant |
MAX6736XKWTD3+T Overview
A total of 5 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 1.8V. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 5 pins are located on this power management. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 10μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6736, the base power ics number. To operate this power management, you will need at least 1.5/5V volts of power.
MAX6736XKWTD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6736XKWTD3+T Applications
There are a lot of Maxim Integrated MAX6736XKWTD3+T Voltage Supervisors applications.
- Smart meter
- Military communications
- Transformer load monitoring equipment
- Power distribution systems of CCU
- Detection of phase imbalance
- Detection of phase loss
- Cloud computing
- Important electronics for automotive protection
- Microcontroller system
- Satellite navigation
