MAX6740XKSYD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 5 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Pin Count | 5 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 150 ms |
| Threshold Voltage | 2.925V |
| Undervoltage Threshold | 2.125V |
| Overvoltage Threshold | 2.25V |
| Height Seated (Max) | 1.1mm |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6740XKSYD3+T Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Strip model. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 1.8V-voltage supply. Power ics operate at 3 supply voltages. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. This power management has 5 pins. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The supervisor's supply current is specified to 10μA.
MAX6740XKSYD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6740XKSYD3+T Applications
There are a lot of Maxim Integrated MAX6740XKSYD3+T Voltage Supervisors applications.
- Detection of phase imbalance
- Satellite navigation
- Radio
- Display equipment
- Microprocessor system
- Dash board
- Stable power system
- Electrical fire monitoring system
- Personal computers
- FPGA design
