MAX6743XKSDD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | VCC1 & VCC2 RESET THRESHOLD IS 2.925V & 0.788V AND ADJUSTABLE THRESHOLD IS DOWN TO 0.5V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6743 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Power Supplies | 1.5/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 0.788V 2.925V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 150ms Minimum |
| Threshold Voltage | +0.792.93V |
| Undervoltage Threshold | 765mV |
| Overvoltage Threshold | 810mV |
| Height Seated (Max) | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6743XKSDD3+T Overview
Power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a 5-TSSOP, SC-70-5, SOT-353 package. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. When 3 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. A total of 5 pins are located on this power management. Supply voltage (Vsup) should be at least 1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 10μA supply current present in the power management. The other features include, for example, [0], which is just one example. It is always advisable to use MAX6743, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 1.5/5V watts of power to operate this voltage supervisor.
MAX6743XKSDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6743XKSDD3+T Applications
There are a lot of Maxim Integrated MAX6743XKSDD3+T Voltage Supervisors applications.
- Power distribution systems of CCU
- Power communication system
- Unattended substation automation
- Smartphones
- Low voltage/high power - AI, GPU
- Electrical fire monitoring system
- Smart meter
- Medical-specific insulation monitor
- Computer applications
- Analog circuit
