MAX6743XKSVD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | VCC1 & VCC2 RESET THRESHOLD IS 2.925V & 1.575V AND ADJUSTABLE THRESHOLD IS DOWN TO 0.5V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6743 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Power Supplies | 1.5/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.575V 2.925V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 150ms Minimum |
| Threshold Voltage | +1.582.93V |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6743XKSVD3+T Overview
It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 1.8V. IC management is possible to find a succession of 3 voltages that have been checked. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 5 pins on power management. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 10μA volt supply current. Among other features, IC power can be also taken advantage of [0], for instance. To find similar IC managements from the manufacturer, you can always search by MAX6743. The voltage supervisor requires a power source of 1.5/5V volts in order to work correctly.
MAX6743XKSVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6743XKSVD3+T Applications
There are a lot of Maxim Integrated MAX6743XKSVD3+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Urban rail transit weak current power monitoring
- Smartphones
- Computer applications
- Kitchen appliances
- Military communications
- Precision measurement
- Medical-specific insulation monitor
- Linux and server computing
- Automotive power systems
