Parameters |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
10μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.665V 2.313V Adj |
Number of Voltages Monitored |
3 |
Reset Timeout |
150ms Minimum |
Threshold Voltage |
+1.672.31V |
Undervoltage Threshold |
1.62V |
Overvoltage Threshold |
1.71V |
Height Seated (Max) |
1.1mm |
Length |
2mm |
Width |
1.25mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
247mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX6743 |
Output |
Push-Pull, Totem Pole |
Pin Count |
5 |
JESD-30 Code |
R-PDSO-G5 |
Power Supplies |
1.5/5V |
MAX6743XKZWD3+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 5-TSSOP, SC-70-5, SOT-353 functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. When a supply voltage of 3 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 10μA. To find similar IC managements from the manufacturer, you can always search by MAX6743. A power supply of 1.5/5V watts is required for the operation of this power management.
MAX6743XKZWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6743XKZWD3+T Applications
There are a lot of Maxim Integrated MAX6743XKZWD3+T Voltage Supervisors applications.
- Consumer electronics
- Telecommunications equipment
- Functional modules
- Urban rail transit weak current power monitoring
- Fire equipment power monitoring system
- Battery cars
- Display equipment
- Stable power system
- Solar power charger
- Sensitive sensors