MAX6744XKWTD3+T
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6744 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Power Supplies | 1.5/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.665V 3.075V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 150ms Minimum |
| Threshold Voltage | +1.665V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 1.1mm |
MAX6744XKWTD3+T Overview
As you can see, this power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 5-TSSOP, SC-70-5, SOT-353 functions for your reference. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 1.8V supply voltages. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 5. IC management can only work with a supply voltage of 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 10μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6744, which is the base power ics number. To operate this power management, you will need at least 1.5/5V volts of power.
MAX6744XKWTD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
10μA operating supply current
MAX6744XKWTD3+T Applications
There are a lot of Maxim Integrated MAX6744XKWTD3+T Voltage Supervisors applications.
- Leakage current detection
- Digitally controlled LDO regulators circuit
- Transformer load monitoring equipment
- Multi-voltage system
- Low voltage/high power - AI, GPU
- Medical-specific insulation monitor
- emergency room
- Smartphones
- Power distribution systems of operating room
- Detection of phase loss
