MAX6759UTWD0+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 6 |
| Packaging | Strip |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset, Voltage Detector |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 13μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20 μs |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 1.53V |
| Max Reset Threshold Voltage | 2.07V |
| Threshold Voltage | 1.8V |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 2.07V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6759UTWD0+T Overview
It is mounted through 6 terminals on the power management. Packaged in the form of a Strip, power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. There are SOT-23 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset, Voltage Detector products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. 6 pins are present in total in this power management. The pins of the power management system count 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Supplied with a operating current of 13μA, this PMIC is capable of fully function as specified.
MAX6759UTWD0+T Features
Simple Reset/Power-On Reset, Voltage Detector type
Minimum supply voltage of 1V
13μA operating supply current
MAX6759UTWD0+T Applications
There are a lot of Maxim Integrated MAX6759UTWD0+T Voltage Supervisors applications.
- Refrigeration
- Utility meter
- Sensitive sensors
- Kitchen appliances
- Military communications
- Multi-voltage system
- External alarm
- Electronics installed in the vehicle
- Consumer electronics
- FPGA design
