MAX6760TATID3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.951W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX6760 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 13μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.5V 3.3V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 100ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Threshold Voltage | +3.3V |
| Undervoltage Threshold | 2.805V |
| Overvoltage Threshold | 3.795V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6760TATID3+T Overview
There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. There are 8-WDFN Exposed Pad functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.6V. IC management conducts in a 2-voltage supply. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 13μA. A similar IC managements number of the manufacturer can always be found by using MAX6760, the base power ics number.
MAX6760TATID3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current
MAX6760TATID3+T Applications
There are a lot of Maxim Integrated MAX6760TATID3+T Voltage Supervisors applications.
- Detection of phase loss
- Rechargeable batteries
- Digitally controlled LDO regulators circuit
- Automotive power systems
- Satellite navigation
- Medical-specific insulation monitor
- Sensitive sensors
- Battery-powered equipment
- Leakage protection
- Efficient information transmission
