Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-WDFN Exposed Pad |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Regulator/Supervisor |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
1.9048W |
Technology |
BICMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
14V |
Terminal Pitch |
0.95mm |
Base Part Number |
MAX6765 |
Output |
Open Drain or Open Collector |
Pin Count |
6 |
Output Voltage |
1.8V |
Output Type |
Fixed |
Polarity |
Positive |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
1 |
Output Current |
100mA |
Adjustable Threshold |
YES |
Quiescent Current |
45μA |
Reset |
Active Low |
Min Input Voltage |
72V |
Voltage - Threshold |
1.665V |
Number of Voltages Monitored |
1 |
Reset Timeout |
8.75ms Minimum |
Max Input Voltage |
72V |
Height Seated (Max) |
0.8mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX6765TTWD2+T Overview
It is mounted through 6 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. Please refer to power management for 6-WDFN Exposed Pad functions. Compared to other Regulator/Supervisor products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. When 14V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power management has a total of 6 pins. There are 6 pins on the supervisor. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is always advisable to use MAX6765, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6765TTWD2+T Features
Regulator/Supervisor type
MAX6765TTWD2+T Applications
There are a lot of Maxim Integrated MAX6765TTWD2+T Voltage Supervisors applications.
- Multi-voltage system
- DSP
- Sensitive sensors
- Data storage applications
- Automotive power systems
- Leakage protection
- DC stabilized power supply module
- Stable power system
- Consumer electronics
- Set top box