MAX6771TALD2+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.625V |
| Max Power Dissipation | 1.9512W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6771 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Output Voltage | 5V |
| Output Type | Adjustable, Fixed |
| Polarity | Positive |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Output Current | 100mA |
| Adjustable Threshold | YES |
| Quiescent Current | 50μA |
| Reset | Active Low |
| Min Input Voltage | 4V |
| Voltage - Threshold | 4.625V Adj |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 8.75ms Minimum |
| Max Input Voltage | 72V |
| Dropout Voltage | 620mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Nominal Output Voltage | 5V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6771TALD2+T Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for 8-WDFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Regulator/Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 14V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. In total, IC powers are 8 pins on the board. The pins of the power management system count 8. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 4.625V to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6771, which is the base power ics number.
MAX6771TALD2+T Features
Regulator/Supervisor type
MAX6771TALD2+T Applications
There are a lot of Maxim Integrated MAX6771TALD2+T Voltage Supervisors applications.
- Kitchen appliances
- Radar
- Electronics installed in the vehicle
- Smart meter
- FPGA design
- Power communication system
- Embedded computing
- Power distribution systems of operating room
- Military communications
- Linux and server computing
