MAX6773TALD2+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 8 |
| Packaging | Strip |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.625V |
| Max Power Dissipation | 1.9512W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 100mA |
| Polarity | Positive |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 72V |
| Min Supply Voltage | 4V |
| Output Current | 100mA |
| Adjustable Threshold | YES |
| Quiescent Current | 50μA |
| Max Output Voltage | 5V |
| Reset | Active Low |
| Min Input Voltage | 4V |
| Reset Timeout | 8.75 ms |
| Max Input Voltage | 72V |
| Dropout Voltage | 620mV |
| Threshold Voltage | 4.625V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6773TALD2+T Overview
This power management consists of 8 mounting terminals on which it can be mounted. There is a Strip-packaging method applied to IC management. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. There are a number of benefits that this PMIC has in common with other Regulator/Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 14V volt supply. The power management is mounted by a Surface Mount-axis. The total number of pins on this power management is 8. Pin count of the power management is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4V. This IC power should be powered by no more than 72V volts of supply voltage (Vsup). There are also other features in the software such as [0], just to mention a few. 1 outputs are available for this IC management's architecture.
MAX6773TALD2+T Features
Regulator/Supervisor type
Minimum supply voltage of 4V
MAX6773TALD2+T Applications
There are a lot of Maxim Integrated MAX6773TALD2+T Voltage Supervisors applications.
- Smartphones
- emergency room
- Data storage applications
- Utility meter
- Power distribution systems of operating room
- Analog circuit
- Electronics installed in the vehicle
- Household appliances
- FPGA design
- Detection of phase sequence
