MAX6773TATD2+T
| Parameters | |
|---|---|
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | MATTE TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.053V |
| Max Power Dissipation | 1.9512W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6773 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Output Voltage | 3.3V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 100mA |
| Polarity | Positive |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Output Current | 100mA |
| Adjustable Threshold | YES |
| Quiescent Current | 50μA |
| Reset | Active Low |
| Min Input Voltage | 4V |
| Voltage - Threshold | 3.053V Adj |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 8.75ms Minimum |
| Max Input Voltage | 72V |
| Dropout Voltage | 866mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Strip |
MAX6773TATD2+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is packaged in a Strip way. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 8-WDFN Exposed Pad functions for your convenience. There are a lot of similarities between this IC power and other Regulator/Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 14V. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. Power management has a total of 8 pins. 8 pins are present on the power management system. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There are other features such as RESET THRESHOLD VOLTAGE IS 3.053V to name a few. You can always use MAX6773, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6773TATD2+T Features
Regulator/Supervisor type
MAX6773TATD2+T Applications
There are a lot of Maxim Integrated MAX6773TATD2+T Voltage Supervisors applications.
- Personal computers
- Power distribution systems of infant care room
- Power distribution systems of operating room
- Power distribution systems of CCU
- Important electronics for automotive safety
- Telecommunications equipment
- DC stabilized power supply module
- Computer applications
- Functional modules
- Consumer electronics
