MAX6791TPSD2+
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6791 |
| Output | Open Drain or Open Collector |
| Pin Count | 20 |
| Output Voltage | 5V |
| Output Type | Adjustable, Fixed |
| Polarity | Positive |
| Power Supplies | 14V |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 2 |
| Output Current | 150mA |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Min Input Voltage | 5V |
| Voltage - Threshold | 2.888V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 8.75ms Minimum |
| Max Input Voltage | 72V |
| Dropout Voltage | 1V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | FIXED OR ADJ WATCH DOG TIMEOUT PERIODS |
| Subcategory | Automotive Circuits |
| Max Power Dissipation | 2.6667W |
| Technology | BICMOS |
MAX6791TPSD2+ Overview
This voltage supervisor has a total of 20 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 2 channels can be found on this supervisor. IC management is packaged as a 20-WQFN Exposed Pad package. There are many benefits that this IC power shares with other Regulator/Supervisor products as well. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 14V. During operation, the power ic is supplied with a voltage of 2. Surface Mount is the one that mounts power management. There is a subcategory called Automotive Circuits for this power management. In total, IC powers are 20 pins on the board. Power managment ic pin count is 20. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The other features include, for example, [0], which is just one example. It is always advisable to use MAX6791, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 14V volts of power in order for this voltage supervisor to operate.
MAX6791TPSD2+ Features
Regulator/Supervisor type
MAX6791TPSD2+ Applications
There are a lot of Maxim Integrated MAX6791TPSD2+ Voltage Supervisors applications.
- Computer applications
- Battery cars
- emergency room
- Transformer load monitoring equipment
- Solar power charger
- Leakage protection
- Telecommunications equipment
- Refrigeration
- Military communications
- Efficient information transmission
