MAX6791TPSD2+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 20 |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | FIXED OR ADJ WATCH DOG TIMEOUT PERIODS |
| Subcategory | Automotive Circuits |
| Max Power Dissipation | 2.6667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Adjustable, Fixed |
| Max Output Current | 150mA |
| Voltage - Output 1 | 3.3V |
| Polarity | Positive |
| Power Supplies | 14V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 72V |
| Min Supply Voltage | 5V |
| Output Current | 150mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 3.3V |
| Voltage - Output 2 | 11V |
| Reset | Active Low |
| Min Input Voltage | 5V |
| Reset Timeout | 8.75 ms |
| Max Input Voltage | 72V |
| Current - Output 1 | 100mA |
| Dropout Voltage | 1.7V |
| Threshold Voltage | 2.888V |
| Current - Output 2 | 100mA |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6791TPSD2+T Overview
This voltage supervisor has a total of 20 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 2 channels. With power management, you get a lot of benefits that you won't find in other Regulator/Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 14V for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Automotive Circuits chip. In total, IC powers are 20 pins on the board. 20 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 5V, which is the minimum supply voltage that should be applied. There should be no more than 72V volts of maximum supply voltage (Vsup) in this power management. Among other features, IC power can be also taken advantage of [0], for instance. A power supply of 14V watts is required for the operation of this power management. The architecture of this IC management supports 2 outputs.
MAX6791TPSD2+T Features
Regulator/Supervisor type
Minimum supply voltage of 5V
MAX6791TPSD2+T Applications
There are a lot of Maxim Integrated MAX6791TPSD2+T Voltage Supervisors applications.
- Smartphones
- Insulation fault location system
- External alarm
- Electrical fire monitoring system
- emergency room
- Medical-specific insulation monitor
- Dash board
- Display equipment
- Electric heating appliances
- Automotive power systems
