MAX6793TPSD2+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | FIXED OR ADJ WATCH DOG TIMEOUT PERIODS |
| Subcategory | Automotive Circuits |
| Max Power Dissipation | 2.6667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6793 |
| Output | Open Drain or Open Collector |
| Pin Count | 20 |
| Output Voltage | 5V |
| Output Type | Adjustable, Fixed |
| Voltage - Output 1 | 3.3V |
| Polarity | Positive |
| Power Supplies | 14V |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 2 |
| Output Current | 150mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 11V |
| Voltage - Output 2 | 11V |
| Reset | Active Low |
| Min Input Voltage | 5V |
| Voltage - Threshold | 2.888V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 8.75ms Minimum |
| Max Input Voltage | 72V |
| Current - Output 1 | 150mA |
| Dropout Voltage | 1V |
| Min Output Voltage | 1.8V |
| Current - Output 2 | 150mA |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6793TPSD2+ Overview
Power management is mounted through 20 terminals. In terms of packaging, power management follows the Tube model. Please refer to this PMIC for 1 functions. This power management is made up of 2 channels which are available in a series format. As a reference, this IC power includes 20-WQFN Exposed Pad functions for your convenience. There are a number of benefits that this PMIC has in common with other Regulator/Supervisor manage ics. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 14V. Power management conducts at a voltage of 2. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Automotive Circuits chip. In total, IC powers are 20 pins on the board. This power management system has 20 pins. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6793, which is the base power ics number. This power management requires 14V power to work.
MAX6793TPSD2+ Features
Regulator/Supervisor type
MAX6793TPSD2+ Applications
There are a lot of Maxim Integrated MAX6793TPSD2+ Voltage Supervisors applications.
- Microprocessor system
- Magnetic resonance imaging
- Rechargeable batteries
- Automotive permanent magnet synchronous motors
- Power communication system
- Sensitive sensors
- Detection of phase loss
- Embedded computing
- Automotive power systems
- Transformer load monitoring equipment
