MAX6822MUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 5 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.38V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Pin Count | 5 |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 4.22V |
| Max Reset Threshold Voltage | 4.53V |
| Threshold Voltage | 4.38V |
| Undervoltage Threshold | 4.22V |
| Overvoltage Threshold | 4.53V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6822MUK+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaging is in the form of a Strip. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of SOT-23 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.5V volt supply. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 5 pins in it. 5 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. It is estimated that the voltage supervisor's supply current is 10μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To operate this power management, you will need at least 5V volts of power.
MAX6822MUK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MAX6822MUK+T Applications
There are a lot of Maxim Integrated MAX6822MUK+T Voltage Supervisors applications.
- Refrigeration
- Solar power charger
- Precision measurement
- Dash board
- Power distribution systems of CCU
- External alarm
- Radar
- Electrical fire monitoring system
- Unattended substation automation
- Network equipment
