MAX6832HXRD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SC |
| Number of Pins | 70 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 235mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Pin Count | 3 |
| JESD-30 Code | R-PDSO-G3 |
| Power Supplies | 0.4/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 550mV |
| Operating Supply Current | 16μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 1.275V |
| Max Reset Threshold Voltage | 1.35V |
| Threshold Voltage | 1.313V |
| Undervoltage Threshold | 1.275V |
| Overvoltage Threshold | 1.35V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6832HXRD3+T Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Strip-packaging is used. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SC functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1.2V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 3 pins on IC management. 70 pins make up the power management. There should be a minimum voltage supply (Vsup) of 550mV for this PMIC. The supply voltage (Vsup) should not exceed 3.6V volts in this IC power. The supervisor's supply current is specified to 16μA. The power management must be powered by 0.4/3.3V volts to function properly.
MAX6832HXRD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6832HXRD3+T Applications
There are a lot of Maxim Integrated MAX6832HXRD3+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Urban rail transit weak current power monitoring
- External alarm
- Computer applications
- Personal computers
- Consumer electronics
- DVR
- Detection of phase sequence
- Power distribution systems of operating room
- FPGA design
