MAX6832VXRD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 70 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 235mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6832 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| JESD-30 Code | R-PDSO-G3 |
| Power Supplies | 0.4/3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 550mV |
| Operating Supply Current | 16μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.575V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 1.53V |
| Max Reset Threshold Voltage | 1.62V |
| Threshold Voltage | +1.575V |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6832VXRD3+T Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-70, SOT-323 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. In a 1.2V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. 70 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 550mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.6V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The power management's supply current is 16μA. For similar manage ics search of the manufacturer, you can always refer to MAX6832, the base PMIC number. The voltage supervisor requires a power source of 0.4/3.3V volts in order to work correctly.
MAX6832VXRD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6832VXRD3+T Applications
There are a lot of Maxim Integrated MAX6832VXRD3+T Voltage Supervisors applications.
- Personal computers
- Medical-specific isolation transformer
- Digitally controlled LDO regulators circuit
- Utility meter
- Power distribution systems of infant care room
- Leakage current detection
- Electronics installed in the vehicle
- Linux and server computing
- Battery cars
- Urban rail transit weak current power monitoring
