MAX6834FXRD0+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 235mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6834 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| JESD-30 Code | R-PDSO-G3 |
| Power Supplies | 0.4/3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 550mV |
| Operating Supply Current | 16μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.05V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 70μs Typical |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 1.02V |
| Max Reset Threshold Voltage | 1.08V |
| Threshold Voltage | +1.05V |
| Undervoltage Threshold | 1.02V |
| Overvoltage Threshold | 1.08V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6834FXRD0+T Overview
It is mounted through 3 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes SC-70, SOT-323 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.2V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 550mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 3.6V volts. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. Supplied with a operating current of 16μA, this PMIC is capable of fully function as specified. You can always use MAX6834, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 0.4/3.3V volts of power.
MAX6834FXRD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6834FXRD0+T Applications
There are a lot of Maxim Integrated MAX6834FXRD0+T Voltage Supervisors applications.
- Analog circuit
- Refrigeration
- Medical-specific isolation transformer
- Transformer load monitoring equipment
- Urban rail transit weak current power monitoring
- Precision measurement
- Smart meter
- DC stabilized power supply module
- Network equipment
- Set top box
