MAX6834FXRD3+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 235mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6834 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| JESD-30 Code | R-PDSO-G3 |
| Power Supplies | 0.4/3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 550mV |
| Operating Supply Current | 16μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.05V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 1.02V |
| Max Reset Threshold Voltage | 1.08V |
| Threshold Voltage | +1.05V |
| Undervoltage Threshold | 1.02V |
| Overvoltage Threshold | 1.08V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6834FXRD3+T Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 1.2V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 550mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.6V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 16μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MAX6834, the base PMIC number. It requires 0.4/3.3V watts of power to operate this voltage supervisor.
MAX6834FXRD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6834FXRD3+T Applications
There are a lot of Maxim Integrated MAX6834FXRD3+T Voltage Supervisors applications.
- Display equipment
- Power distribution systems of infant care room
- Digitally controlled LDO regulators circuit
- Precision measurement
- Leakage current detection
- Automotive permanent magnet synchronous motors
- DVR
- Fire equipment power monitoring system
- emergency room
- External alarm
