MAX6837HXSD0+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 245mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6837 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Power Supplies | 0.4/3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 550mV |
| Operating Supply Current | 16μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.313V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 70μs Typical |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 1.275V |
| Max Reset Threshold Voltage | 1.35V |
| Threshold Voltage | +1.313V |
| Undervoltage Threshold | 1.275V |
| Overvoltage Threshold | 1.35V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6837HXSD0+T Overview
It is mounted through 4 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. There are SC-82A, SOT-343 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 1.2V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 4 pins on the board. A voltage (Vsup) that doesn't fall below 550mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 3.6V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. Supplied with a operating current of 16μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6837, the base power ics number. To be able to work, this power management requires 0.4/3.3V volts of power.
MAX6837HXSD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6837HXSD0+T Applications
There are a lot of Maxim Integrated MAX6837HXSD0+T Voltage Supervisors applications.
- Cloud computing
- Battery cars
- FPGA design
- Radar
- Computer applications
- Power distribution systems of ICU
- Electrical fire monitoring system
- Data storage applications
- Leakage protection
- Detection of phase sequence
