MAX6837VXSD0+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SC |
| Number of Pins | 70 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 245mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Power Supplies | 0.4/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 550mV |
| Operating Supply Current | 16μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 70 μs |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 1.53V |
| Max Reset Threshold Voltage | 1.62V |
| Threshold Voltage | 1.575V |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6837VXSD0+T Overview
As you can see, this power management is mounted through 4 terminals. Strip-packaging is used. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 1.2V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 4 pins in it. 70 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 550mV. There should be no more than 3.6V volts of maximum supply voltage (Vsup) in this power management. Supplied with a operating current of 16μA, this PMIC is capable of fully function as specified. In order to operate this power management, it requires 0.4/3.3V volts of power.
MAX6837VXSD0+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6837VXSD0+T Applications
There are a lot of Maxim Integrated MAX6837VXSD0+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Utility meter
- External alarm
- Dash board
- Power distribution systems of ICU
- Network equipment
- Smart meter
- Household appliances
- Set top box
- Power communication system
