MAX6846KARD7+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.6V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 714mW |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Supply Current-Max (Isup) | 0.007mA |
| Min Reset Threshold Voltage | 600mV |
| Max Reset Threshold Voltage | 630mV |
| Threshold Voltage | +2.625V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6846KARD7+T Overview
SOT-23-8 is the appropriate package for it. This device uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. Channels available are 1. 8 pins are attached to it. Use Surface Mount to mount this part. A minimum supply voltage of 1.6V volts is required for this part. In this case, it's a Power Management Circuits family component. A voltage of 5.5V volts is recommended for this chip. In order for this device to be activated, its value cannot be less than 0. Temperatures less than 85°C degrees Celsius are recommended for use. You should leave this device set to 3.6V at all times. In total, it has 8 pins. It is recommended that the device's reset threshold voltage be below 630mV. There should be a minimum reset threshold voltage over 600mV on the device. There must be 0.007mA more than 0.007mA current available from the supply (Isup).
MAX6846KARD7+T Features
Available in SOT-23-8 Package
with 8 Pins
operate supply voltage at the range of 3.6V
The Min Reset Threshold Voltage at 600mV
MAX6846KARD7+T Applications
There are a lot of Maxim Integrated MAX6846KARD7+T Battery Management ICs applications.
- Tower communications
- Electric compressor
- Electric train traction batteries
- Air conditioner
- ADAS camera system
- Cleaning machines
- Estimating the battery’s operational state
- Rear light with dynamic control
- On-board battery charger
- Hybrid electric vehicles
