MAX6848KASD7+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.6V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 714mW |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Supply Current-Max (Isup) | 0.007mA |
| Min Reset Threshold Voltage | 600mV |
| Max Reset Threshold Voltage | 630mV |
| Threshold Voltage | +2.925V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6848KASD7+T Overview
SOT-23-8 is the appropriate package for it. This device uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. A total of 1 channels are available. Currently, there are 8 pins on it. It is recommended that you mount this part using Surface Mount. A voltage of at least 1.6V volts is required on this part. The Power Management Circuits family of electrical components includes this component. There should be 5.5V voltage over 5.5V volts on the supply to this chip. It should not be less than -40°C in order to activate this device. Using it below 85°C temperatures is recommended. You should leave this device set to 3.6V at all times. 8 pins are present on it. Reset threshold voltage should be under 630mV. A minimum reset threshold voltage of 600mV should be exceeded by the device. The maximum supply current (Isup) must not exceed 0.007mA.
MAX6848KASD7+T Features
Available in SOT-23-8 Package
with 8 Pins
operate supply voltage at the range of 3.6V
The Min Reset Threshold Voltage at 600mV
MAX6848KASD7+T Applications
There are a lot of Maxim Integrated MAX6848KASD7+T Battery Management ICs applications.
- Providing battery protection
- Wearables
- Sports cars
- Estimating the battery’s operational state
- Smart speaker / portable audio
- xEV charging station (off-board charger)
- ADAS radar
- Weather stations
- Center information display (CID)
- Accessory drives
