MAX6848KAVD7+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.6V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 714mW |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Supply Current-Max (Isup) | 0.007mA |
| Min Reset Threshold Voltage | 600mV |
| Max Reset Threshold Voltage | 630mV |
| Threshold Voltage | +1.575V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Width | 1.625mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6848KAVD7+T Overview
For the SOT-23-8 package, it is appropriate. The analog IC in this device is POWER SUPPLY SUPPORT CIRCUIT. It is possible to access 1 channels. 8 pins are present on it. It is recommended that you mount this part using Surface Mount. In order for this part to operate properly, its supply voltage must not be lower than 1.6V volts. Power Management Circuits is the family name of this electrical component. 5.5V voltage greater than 5.5V volts should be supplied to this chip. This device cannot be activated with a value less than -40°C. The product should be used below 85°C degrees Celsius. It is always recommended that this device is set to 3.6V. The pins on it total 8. It is recommended that the device's reset threshold voltage be below 630mV. Minimum reset threshold voltage of the device should be above 600mV. Ensure that the maximum supply current (Isup) is below 0.007mA.
MAX6848KAVD7+T Features
Available in SOT-23-8 Package
with 8 Pins
operate supply voltage at the range of 3.6V
The Min Reset Threshold Voltage at 600mV
MAX6848KAVD7+T Applications
There are a lot of Maxim Integrated MAX6848KAVD7+T Battery Management ICs applications.
- LED lighting
- ADAS sonar
- 3-wheelers
- Estimating the battery’s operational state
- PV inverter
- Wireless charging
- Accessory drives
- Front light
- Lifts and cranes
- Electric compressor
