MAX6884ETP+
| Parameters | |
|---|---|
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1.1mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | Adjustable/Selectable |
| Undervoltage Threshold | 167mV |
| Overvoltage Threshold | 1.017V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.702W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.05V |
| Base Part Number | MAX6884 |
| Output | Open Drain, Push-Pull |
| Pin Count | 20 |
| Number of Channels | 1 |
| Voltage | 5V |
| Max Supply Voltage | 5.8V |
MAX6884ETP+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 20 in total. A Tube package is used to package the power management. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for 20-WQFN Exposed Pad functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.05V supply voltage, the power management conducts. Power management conducts at a voltage of 6. Surface Mount mounts IC management. It has a total of 20 pins that are attached to IC management. This power management system has 20 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. There should be no more than 5.8V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. The power management's supply current is 1.1mA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6884, which is the base power ics number.
MAX6884ETP+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
1.1mA operating supply current
MAX6884ETP+ Applications
There are a lot of Maxim Integrated MAX6884ETP+ Voltage Supervisors applications.
- Network equipment
- Important electronics for automotive protection
- Detection of phase imbalance
- Smart meter
- Microcontroller system
- Utility meter
- Military electronics
- Kitchen appliances
- Computer applications
- Electronics installed in the vehicle
