MAX6887KETE+
| Parameters | |
|---|---|
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX6887 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.8V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | 180ms Minimum |
| Supply Current-Max (Isup) | 1.2mA |
| Undervoltage Threshold | 557mV |
| Overvoltage Threshold | 673mV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
MAX6887KETE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Packaged in a Tube-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 6 channels. The purpose of this IC power is to provide you with a reference of 16-WQFN Exposed Pad functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 6. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 16 pins on IC management. This power management system has 16 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.7V. There should be no more than 5.8V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 900μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. For similar manage ics search of the manufacturer, you can always refer to MAX6887, the base PMIC number. There is a requirement for 3/5V power to power this power management.
MAX6887KETE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
900μA operating supply current
MAX6887KETE+ Applications
There are a lot of Maxim Integrated MAX6887KETE+ Voltage Supervisors applications.
- Embedded computing
- emergency room
- Low voltage/high power - AI, GPU
- Transformer load monitoring equipment
- Power distribution systems of CCU
- Network equipment
- Detection of phase sequence
- Set top box
- DSP
- Power distribution systems of operating room
