MAX6887PETE+
| Parameters | |
|---|---|
| Number of Voltages Monitored | 6 |
| Reset Timeout | 180ms Minimum |
| Supply Current-Max (Isup) | 1.2mA |
| Undervoltage Threshold | 557mV |
| Overvoltage Threshold | 673mV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX6887 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.8V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
MAX6887PETE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. This power ic is packaged in a way that looks like a Tube. To assist you, this IC power includes 1 functions. There are 6 channels available on this supervisor, and each channel has a different function. Please find attached 16-WQFN Exposed Pad functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 5V. Power management conducts at a voltage of 6. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 16 pins in it. This power management has 16 pins. There should be a minimum voltage supply (Vsup) of 2.7V for this PMIC. There should be no more than 5.8V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 900μA. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6887, which is the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.
MAX6887PETE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
900μA operating supply current
MAX6887PETE+ Applications
There are a lot of Maxim Integrated MAX6887PETE+ Voltage Supervisors applications.
- Insulation fault location system
- Power distribution systems of operating room
- FPGA design
- Precision measurement
- Battery-powered equipment
- Detection of phase loss
- Dash board
- Microcontroller system
- Medical-specific insulation monitor
- Unattended substation automation
