MAX6888EETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX6888 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.8V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.8V 2.5V 3.3V Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 180ms Minimum |
| Supply Current-Max (Isup) | 1.2mA |
| Undervoltage Threshold | 557mV |
| Overvoltage Threshold | 643mV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6888EETE+ Overview
It is mounted through 16 terminals on the power management. It is packaged with Tube. To assist you, this IC power includes 1 functions. A series of 6 channels can be found on this supervisor. In this IC management you will find 16-WQFN Exposed Pad functions for you to refer to. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. Power ics operate at 4 supply voltages. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 16 pins. Pin count of the power management is 16. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. There should be no more than 5.8V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 900μA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. You can always use MAX6888, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 3/5V power to work.
MAX6888EETE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
900μA operating supply current
MAX6888EETE+ Applications
There are a lot of Maxim Integrated MAX6888EETE+ Voltage Supervisors applications.
- Power distribution systems of CCU
- Automotive power systems
- Microprocessor system
- Telecommunications equipment
- DSP
- Computer applications
- Refrigeration
- Battery cars
- DVR
- Battery cars
