MAX6888KETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX6888 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.8V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.8V 3.3V 5V Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 180ms Minimum |
| Supply Current-Max (Isup) | 1.2mA |
| Undervoltage Threshold | 527mV |
| Overvoltage Threshold | 673mV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6888KETE+ Overview
A total of 16 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 6 channels. For your reference, this PMIC includes a list of 16-WQFN Exposed Pad functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 5V supply voltages. A supply voltage of 4 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 16 pins that are attached to IC management. Pin count of the power management is 16. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The maximum supply voltage (Vsup) is not to exceed 5.8V volts in this IC management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 900μA is the recommended value. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by MAX6888. In order to operate this power management, it requires 3/5V volts of power.
MAX6888KETE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
900μA operating supply current
MAX6888KETE+ Applications
There are a lot of Maxim Integrated MAX6888KETE+ Voltage Supervisors applications.
- Power distribution systems of CCU
- Electric heating appliances
- Urban rail transit weak current power monitoring
- Detection of phase sequence
- Stable power system
- Power distribution systems of ICU
- Rechargeable batteries
- Medical-specific isolation transformer
- Functional modules
- DVR
