MAX6888OETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX6888 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.8V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.5V 3.3V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 180ms Minimum |
| Supply Current-Max (Isup) | 1.2mA |
| Undervoltage Threshold | 527mV |
| Overvoltage Threshold | 673mV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6888OETE+ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. Power management is possible to find a series of 1 functions. A series of 6 channels can be found on this supervisor. In this IC management you will find 16-WQFN Exposed Pad functions for you to refer to. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 5V. A supply voltage of 4 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 16 pins are located on this power management. The pins of the power management system count 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.7V. There should be no more than 5.8V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 900μA volt supply current. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6888, which is the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.
MAX6888OETE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
900μA operating supply current
MAX6888OETE+ Applications
There are a lot of Maxim Integrated MAX6888OETE+ Voltage Supervisors applications.
- Computer applications
- emergency room
- Sensitive sensors
- Smartphones
- Fire equipment power monitoring system
- Dash board
- Linux and server computing
- Leakage protection
- Smart meter
- FPGA design
