MAX690ACPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 250kHz |
| Base Part Number | MAX690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 727mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX690ACPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins are present on the power management system. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 350μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX690, the base power ics number. The power management must be powered by 5V volts to function properly. The power management can work with a maximum supply temperature of 350μA. As a rule of thumb, voltage supervisor will work well in most cases with a frequency of 250kHz.
MAX690ACPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
350μA operating supply current
MAX690ACPA+ Applications
There are a lot of Maxim Integrated MAX690ACPA+ Voltage Supervisors applications.
- Precision measurement
- Leakage current detection
- Rechargeable batteries
- Stable power system
- Detection of phase imbalance
- External alarm
- Radio
- Sensitive sensors
- Kitchen appliances
- Smartphones
