MAX690AEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 250kHz |
| Base Part Number | MAX690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 727mW |
| Max Supply Current | 500μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX690AEPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in the form of a Tube, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. This IC power shares lots of benefits with other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 5V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. The mount is provided by Through Hole. This power ic can be sub-categorized as Power Management Circuits. There are a total of 8 pins on power management. 8 pins are present on the power management system. It is recommended that Vsup should not be less than 1.2V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Through Hole is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 500μA. You can always use MAX690, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 5V power to power this power management. At most, voltage supervisor can operate at a supply temperature of 500μA. Generally, this IC management works at a frequency of 250kHz, which is sufficient for most applications.
MAX690AEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
500μA operating supply current
MAX690AEPA+ Applications
There are a lot of Maxim Integrated MAX690AEPA+ Voltage Supervisors applications.
- Power distribution systems of infant care room
- Unattended substation automation
- Display equipment
- Cloud computing
- Consumer electronics
- Utility meter
- Electrical fire monitoring system
- Electric heating appliances
- Functional modules
- emergency room
