MAX690AESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 250kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 471mW |
| Max Supply Current | 500μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX690AESA+ Overview
As you can see, this power management is mounted through 8 terminals. Tube-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 5V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. 8 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 350μA. It is always advisable to use MAX690, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 500μA. In general, this IC power runs at a frequency of 250kHz, which is sufficient for most applications as far as this IC power is concerned.
MAX690AESA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
350μA operating supply current
MAX690AESA+ Applications
There are a lot of Maxim Integrated MAX690AESA+ Voltage Supervisors applications.
- External alarm
- Smart meter
- Utility meter
- Radio
- Radar
- Functional modules
- Display equipment
- DSP
- Automotive power systems
- Computer applications
